Garage door spring adjustment is necessary if your garage door opener is hard to open or pens quickly. The torsion spring of your garage door opener may be loose or too tight, causing the problem to occur from time to time.
While the DIY garage door spring adjustment is not recommended, you can still do this as long as you are knowledgeable and skilled on repairing mechanical things. Below are steps on how to adjust garage door springs. These tips are from professional contractors.
Firstly, you must unplug or disconnect the garage door opener if it is electronically operated. To hold the door in place, you can use a C-clamp on the track of the garage door to hold it in place. Secondly, you must locate the cone or adjustment collar at the shaft’s center.
Thirdly, get a metal rod and insert it into the holes of the adjustment collar. This can hold the collar in place so that you can loosen the screw. Make sure that the screws are set on flat before making an adjustment.
Garage door spring adjustment requires adjusting the collar. Turn the collar along with the rod with 1/4 increments to the right or left, depending if you want to loosen or tighten the spring. After doing so, walk the spring out to ensure that it does not bind at the operation.
According to garage door repair Guadalupe AZ specialists, you can do this by tapping the rod that holds the spring tension, away from the center of door opener.